EPEVER Photo voltaic Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER Photo voltaic Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Charge Controller is usually a hugely effective photo voltaic controller created for off-grid solar units. Depending on multiphase synchronous rectification technologies, it makes certain optimized energy conversion and system security for a variety of photovoltaic (PV) apps.
Important Characteristics of your EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Demand Controller technology for exceptional solar Vitality harvesting. Crucial options include:
Multiphase Synchronous Rectification (MSR) for improved Strength conversion.
Sophisticated MPPT Algorithm with >ninety nine% effectiveness.
Dual-Stage Charging for Improved battery existence.
LCD Show with actual-time info monitoring.
Several Load Handle Modes which includes guide and timer.
Extensive Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Stage-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Ensure all components are bundled: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the model number and voltage ratings match your photo voltaic panel and battery requirements.
2. Mounting the Cost Controller
Choose a nicely-ventilated, dry location near the battery lender.
Safe the Tracer AN controller using the provided mounting brackets.
Maintain proper clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Constantly stick to correct safety protocols and make sure the technique is driven off prior to connecting factors.
Action 1: Connect the battery terminals to the demand controller (constructive to good, negative to destructive).
Action 2: Join the photo voltaic panel array to the PV input terminals.
Step three: Link the load terminals if using a immediate load link.
Step four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity within the controller by connecting the battery to start with.
Utilize the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle control.
5. Monitoring and Information Logging
The Tracer AN Series supports real-time checking utilizing the MT50 remote meter.
Information can be logged by using the RS485 interaction port working with software package for example Photo voltaic Station PC.
Remote checking can be done Using the EPEVER WiFi module.
6. Troubleshooting Popular Difficulties
Difficulty one: No Electrical power Output
Check battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: Above-Voltage Defense
Verify the photo voltaic array’s voltage rating.
Change method visit here parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Lowered Electrical power losses in the course of conversion.
Increased Reliability: Secure overall performance underneath variable loads.
More time Battery Life: Regular and exact charging profiles.
Summary
The EPEVER Photo voltaic Cost Controller with multiphase synchronous rectification engineering is an Extraordinary option for optimizing solar power era and increasing battery lifestyle. By pursuing the above setup information, users can make certain most efficiency and program longevity.